Central Air Source Heat Pumps


Your rebate application will be reviewed to ensure it satisfies all program policy. Please review the terms and conditions at the bottom of this page. The equipment must meet efficiency guidelines and is only eligible for one rebate per unit. Heating and cooling equipment must be installed by a licensed professional contractor and must be properly sized for space it is to serve. 


What To Include With Your Rebate Application

It should not take longer than 8-10 minutes to complete this rebate application process as long as you have everything you to need to finish. That includes the name and address for the rebate payment and the name and address where the equipment has been installed. You will be asked to enter the installation date, serial number, AHRI number, and the rated SEER. You will also be asked to upload a copy of your itemized invoice or detailed receipt that also has the model number listed on it.

The rated SEER is the equipment’s seasonal energy efficiency ratio. The AHRI number is the certification number for this rating. You can obtain these numbers from your dealer or through the AHRI directory by CLICKING HERE

The heating and cooling industry updated its efficiency ratings for 2023. Cooling efficiency is now SEER2 and heating efficiency is now HSPF2. Your will installer will locate these ratings, along with the capacity ratings, on the unit's AHRI certificate as show below. In most cases the original SEER and HSPF can also be found on that certificate. However, if they are not then you may use this cross reference table to determine eligibility. 



Terms and Conditions

By submitting this form electronically, you certify the provided information is truthful and accurate and that you have purchased and installed the identified equipment. Utility reserves the right to withhold a rebate if any entries are found untruthful or inaccurate and may take extraordinary steps to validate the claims.
At the bottom of the next page, you will find more detailed terms & conditions. Please review prior to submitting your application. Your submissions means that you have accepted these. 

Recipient
Installation Address
Recipient


Enter your information in the fields below.

Information needs to be entered in the same order the fields appear. If you are unable to select a record from the drop down that indicates the criteria has not been met.

Date must be between 1/1/2023 and 12/31/2050.


Listed below are the available items.

Begin End
01/01/2023 12/31/2050 Central Air Source Heat Pump >=15.2 SEER2 & >=8.0 HSPF2
01/01/2023 12/31/2050 Central Air Source Heat Pump >=16.2 SEER2 & >=8.5 HSPF2
01/01/2023 12/31/2050 Central Air Source Heat Pump >=17.1 SEER2 & >=8.9 HSPF2


Add a new Line

All fields are required unless otherwise indicated.

Please upload your itemized invoice or receipt.

Preview Remove


Before continuing, please make sure you uploaded all required documentation.



Please enter any comments you have below. When ready, click on Submit below.



Back
Next
Submit to complete

* Indicates a required field.


Additional Program Specific Terms & Conditioners

For Shade Trees, there is a maximum limit of one tree per billing customer per year. 

For Residential and Non-Residential Efficient Windows, the incentive is per window opening. 

For Residential and Non-Residential Attic and Wall Insulation, for homes and non-residential structures built during or after 2015 the improvement must be ICF or spray foam insulation. 


General Terms & Conditions

By submitting this form electronically, you certify the provided information is truthful and accurate and that you have purchased and installed the identified equipment or completed the identified project. Utility reserves the right to withhold a rebate if any entries are found untruthful or inaccurate and may take extraordinary steps to validate the claims including, but not limited to, a site visit to verify the new efficient products have been installed.

Proof of purchase is required and you will be prompted to upload a proof document into this application. The price of the efficient product/project for which you are applying for a rebate must be clearly shown separate from other charges. Utility reserves the right to reduce or deny the rebate if the proof document shows the equipment was purchased or the project was fulfilled at a substantial discount to standard rates. For the recycling rebate, proof of delivery to a landfill or recycling company is required.  Failure to provide the correct documentation will result in an application being sent back or denied.

Pre-approval may be required. Any rebate application exceeding $1500 will require preapproval by the Utility and may also require a Utility employee visit the site before the work has started to audit what is being replaced. No customer shall receive more than $5,000 worth of incentives during any period of 12 consecutive months. 

After this application is received, Utility may elect to inspect the equipment or project to verify it qualifies. 

You must be a customer of Utility, be eligible to participate in the rebate program, and energy efficiency funds must be available at the time you submit your application. New equipment must be purchased outright, and the claim must be filed within 90 days of the installation date and not after January 31st of the following year. Utility acceptance of this application does not guarantee payment of the incentive. Utility reserves the right to change, modify, or end any or all parts of the rebate program without notice. 

Support local business. We ask that your procure your efficient products and services from a local supplier, either based in Iowa or an adjacent county to Iowa. 

Utility has no control over exogenous energy use factors including, but not limited to, consumer behavior and weather conditions, and cannot guarantee the high-efficiency equipment will result in reduced usage or in cost savings. Utility does not endorse any manufacturer, contractor, dealer, or design. Utility makes no warranties or representations of any kind regarding the equipment or any services provided in connection with this rebate program.

Utility liability will not exceed the amount of the rebate, and Utility is not liable for any equipment or services provided in connection with this rebate program, and in no event is Utility liable for any special, incidental, or consequential damages in connection with this rebate program. You agree to indemnify, defend, hold harmless and release Utility from any claims, damages, liabilities, costs and expenses (including reasonable attorneys’ fees) arising from or relating to the removal, disposal, installation or operation of any equipment or related materials in connection with the programs described in this application, including any incidental, special or consequential damages.

Utility is not responsible for any tax liability that may be imposed as a result of the payment of incentives. 



Powered by ©   Incentit